This story originally appeared in TRANSWORLD SNOWBOARDING. Words by TRANSWORLD SNOWBOARDING. A proper detuning is in order any time you unsheathe a new board. Sure, you can get by without it, but be prepared for unexpected edge hooks in the worst possible places, like, say, icy cat tracks first thing in the morning or cold steel rails on your last lap through the park. Count on it. Or follow these five steps to detuning your new board and up your odds of staying on your feet first chair to last. What you need
Everything you need to detune a snowboard. Photo: Nick Hamilton/TRANSWORLD SNOWBOARDING
– Medium-coarse file. It can be found at any hardware store. – Gummy stone. Great for removing minor burrs; a good thing to have in your pocket at all times. – Diamond stone. Use like the gummy to polish your edge.
- Remove major burrs
Remove any burrs. Photo: Nick Hamilton/TRANSWORLD SNOWBOARDING This is essentially the first once-over treatment with the file to buff out any of the gnarly snags in your edge. Find the trouble spots and smooth them out. 2. Detune tip and tail
Detune the tail and the tip. Photo: Nick Hamilton/TRANSWORLD SNOWBOARDING Find the widest part of your board at the nose and tail; that’s called the contact point. It’s the section of edge that’s most likely to catch on hardpack. Then start an inch back from that point and use the file to round out the edge toward your nose. 3. Light detune of the entire edge
Lightly detune the entire edge. Photo: Nick Hamilton/TRANSWORLD SNOWBOARDING Visually divide your edges into three sections. Place the file on your edge at about a 45-degree angle and make one or two passes over each of the sections. The idea is to just take a little bit of the edge off. This probably isn’t necessary for pipe jocks, East Coast riders or any of you closet Euro carvers out there, because all of you will want to keep that edge razor sharp. 4. Remove all edge shards with a cloth
Remove all edge shards with a cloth. Photo: Nick Hamilton/TRANSWORLD SNOWBOARDING Clean up all that shredded edge so as to keep those micro shards off your board and out of the base. 5. Polish the edge with a gummy and/or diamond stone
Polish. Photo: Nick Hamilton/TRANSWORLD SNOWBOARDING Although it might seem like your edge is smooth, there are really a lot of little micro burrs that need buffing out, so take that gummy or diamond stone to the edge and finish it off right. More from TRANSWORLD SNOWBOARDING How To Wax A Snowboard Stale Sandbech, Alek Oestreng, and Len Jorgensen at Fonna Glacier
For access to exclusive gear videos, celebrity interviews, and more, subscribe on YouTube!
More News
Work in Comfort With These Timberland PRO Ridgework Boots
Men’s Journal Everyday Warrior Podcast Episode 35: Shaun White
This Book Is Changing the Way That Brands Do Business
Have Your Child Create Special Mother’s Day Keepsakes with Sawyer
Total Wireless Awards Honor Those Who Went Above and Beyond Last Year
Introducing A New Tool to Help You Spend Some Well Deserved Bonding Time With Your Children
All Stories
More Videos
The MJ5: Tony Hawk on His Favorite Gear, Why He Always Carries His Board, and More
Here's the Difference Between Bourbon and Whiskey
Young Guns and a Supercharged Catamaran: U.S. SailGP Team Takes on New York City
This story originally appeared in TRANSWORLD SNOWBOARDING. Words by TRANSWORLD SNOWBOARDING.
A proper detuning is in order any time you unsheathe a new board. Sure, you can get by without it, but be prepared for unexpected edge hooks in the worst possible places, like, say, icy cat tracks first thing in the morning or cold steel rails on your last lap through the park. Count on it. Or follow these five steps to detuning your new board and up your odds of staying on your feet first chair to last.
What you need
– Medium-coarse file. It can be found at any hardware store. – Gummy stone. Great for removing minor burrs; a good thing to have in your pocket at all times. – Diamond stone. Use like the gummy to polish your edge.
1. Remove major burrs
2. Detune tip and tail
3. Light detune of the entire edge
4. Remove all edge shards with a cloth
5. Polish the edge with a gummy and/or diamond stone
More from TRANSWORLD SNOWBOARDING
How To Wax A Snowboard
Stale Sandbech, Alek Oestreng, and Len Jorgensen at Fonna Glacier
For access to exclusive gear videos, celebrity interviews, and more, subscribe on YouTube!
More News
Work in Comfort With These Timberland PRO Ridgework Boots
Men’s Journal Everyday Warrior Podcast Episode 35: Shaun White
This Book Is Changing the Way That Brands Do Business
Have Your Child Create Special Mother’s Day Keepsakes with Sawyer
Total Wireless Awards Honor Those Who Went Above and Beyond Last Year
Introducing A New Tool to Help You Spend Some Well Deserved Bonding Time With Your Children
All Stories
More Videos
The MJ5: Tony Hawk on His Favorite Gear, Why He Always Carries His Board, and More
Here's the Difference Between Bourbon and Whiskey
Young Guns and a Supercharged Catamaran: U.S. SailGP Team Takes on New York City
More News
Work in Comfort With These Timberland PRO Ridgework Boots
Men’s Journal Everyday Warrior Podcast Episode 35: Shaun White
This Book Is Changing the Way That Brands Do Business
Have Your Child Create Special Mother’s Day Keepsakes with Sawyer
Total Wireless Awards Honor Those Who Went Above and Beyond Last Year
Introducing A New Tool to Help You Spend Some Well Deserved Bonding Time With Your Children
All Stories
More Videos
The MJ5: Tony Hawk on His Favorite Gear, Why He Always Carries His Board, and More
Here's the Difference Between Bourbon and Whiskey
Young Guns and a Supercharged Catamaran: U.S. SailGP Team Takes on New York City
More News
Work in Comfort With These Timberland PRO Ridgework Boots
Men’s Journal Everyday Warrior Podcast Episode 35: Shaun White
This Book Is Changing the Way That Brands Do Business
Have Your Child Create Special Mother’s Day Keepsakes with Sawyer
Total Wireless Awards Honor Those Who Went Above and Beyond Last Year
Introducing A New Tool to Help You Spend Some Well Deserved Bonding Time With Your Children
All Stories
More Videos
The MJ5: Tony Hawk on His Favorite Gear, Why He Always Carries His Board, and More
Here's the Difference Between Bourbon and Whiskey
Young Guns and a Supercharged Catamaran: U.S. SailGP Team Takes on New York City
More Videos
The MJ5: Tony Hawk on His Favorite Gear, Why He Always Carries His Board, and More
Here's the Difference Between Bourbon and Whiskey
Young Guns and a Supercharged Catamaran: U.S. SailGP Team Takes on New York City
More Videos
The MJ5: Tony Hawk on His Favorite Gear, Why He Always Carries His Board, and More
Here's the Difference Between Bourbon and Whiskey
Young Guns and a Supercharged Catamaran: U.S. SailGP Team Takes on New York City